How To Shut Down Narrator And Magnifier?

1. From Start Menu, Go to Control Panel (View: Category)
2. Then click on "Ease of Access" then under "Ease of Access Section", click on "Optimize Visual Display"
3. Then under "Hear text and descriptions read aloud", uncheck check box for "Turn on Narrator".
4. Then also uncheck the check box for "turn on magnifier" under "make things on screen larger section" then click on "apply" then "OK".

There are also many other features that you can disable or enable from here. Google+

How To Fix Error Message 1203 On Dell Printer 926

You might be able to find an answer here:

http://answers.yahoo.com/question/index?qid=20091012063733AAnkO8i
OR
http://www.fixyourownprinter.com/forums/printer/48161
OR
http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/fix-error-1203-for-printer-926/e9af63c0-abb2-4a07-bf81-e0f88a716dd1
OR

Please follow the steps below to reset the printer:

1. Turn off the printer power.
2. Disconnect the printer power brick and wait for 10 seconds.
3. While holding down the Start and Cancel buttons, re-insert the printer power brick.
4. Hold the Start and Cancel buttons until the power LED begins blinking and the printer shuts itself off.
5. Turn on the printer power.
6. The printer will be in the initial setup mode and you will need to choose a language, country, and enter the date and.

OR
Other solutions found on the net:
Error 1203 is a very interesting error code. Here is what I found out about error 1203
It's mean your cartridges overflow even from brand new cartridges after a several prints or right after you refilled the cartridges. Check to see if ink are smeared on the holder where the contact panel with the cartridge. I have the same problem which I think Lexmark have a problem and overlook.

Solution:
I use the Kleenex with a few drops of water to dampen and clean off those contact on the holder and my printer work again.
The refill ink work very well if you let it sit 24 hrs. Then before you print anything, you should run aligned the cartridges a couple times then run clean cartridges a couple times.
Print the test page to see how it's look and way you go.
Be sure not to leave any debris of Kleenex on those holder contact panel.